What is Checkered Sheet?

Checkered Sheetwith the so-called baklava patternsformedare products.

Checkered Sheetsas an alternative to plain mild steeldesigned. with many useschecker plate, is often preferred in steps. In addition to its widespread use,on the stair stepsThe main reason for choosingserratedIt is the feature of preventing people from slipping and falling with the help of its surface. Another important part of the checker platesuperiorityOn the other hand, it is observed that it is more durable when compared with plain black sheets in terms of strength resistance.

Checkered SheetsIt can show dimensional changes according to the wishes of the people. In addition to these, there are some generally accepted standards in the world. The quality of the products produced according to these standards andtheir durabilityIt differs from other sheets in terms of quality and provides customer satisfaction.

If we talk about these standards briefly,laziness0.50mm. and 1.00mm. must be in the range. Length1000 mm with 12.000 mmmay be in the range. In addition, according to the needs of these customers20,00 mmup to dimensions.

With diamond-patterned sheet metalrunusage areas are more or less the same as other sheets. It is used in the exterior coatings of warehouses and warehouses, houses, garages, automotive industry, etc. used in many fields.

Descriptions

1) The quality specified in this table is produced in İsdemir facilities within the framework of agreements made with customers.

2) In this quality, it is produced in such a way that there is no roll breakage.

3) Mechanical testing is not done according to production practices.

4) In the chemical composition of the steel, min. For grades with 0.020% Al, the upper limit value of N is not applied.

5) These grades are produced as fully stagnant and Al/N minimum2:1rate.

6) Carbon equivalent, CEV (IIW) % = C + Mn / 6 + (Cr +Mo + V) / 5 + (In+ Cu) / 15 is calculated according to the formula.

7) For S275 and S355 gradesmax. carbonequivalent (CEV) is increased by 0.02% for %Si ≤ 0.04 and 0.01% for %Si ≤ 0.25.

8) Galvanized coating as “Category A”suitable.CategorySi ≤ 0.030% and Si+2.5P ≤ 0.090% limits apply in Class A

9) Galvanized coating as “Category B”suitable.CategoryIn class B, the limit of Si 0.14≤ Si ≤0.25% is applied.

10) In line with the production practices, the suitability for galvanized coating can be considered subject to negotiation at the order stage. Classes of suitability for galvanized coating Category A

in the classroom Si ≤ 0.030% ve Si+2.5P ≤ 0.090% limiti, Kategori B sınıfında Si 0.14≤ Si ≤0.25% limiti, Kategori D sınıfında Si 0.25< Si ≤0.35% limiti olarak uygulanır.

11th)Max. It is produced up to 8 mm thickness.

Checkered SheetThe usage area is as wide as possible with the help of its pattern, durability and being able to be used reliably. Its decorative appearance leads people to prefer to use checkered plate on floors and walls. ownsserratedAnother important area of ​​use with the help of the surface is fire escapes, walkways and ramps. Thus, even if there are dangerous conditions such as wet floors, people can pass on these floors without slipping and no safety problems arise.