Galvanized Pipe Threaded Sleeve, What Is It?

In the industry, black pipe, galvanized pipe, galvanized threaded pipe sleeve, pipe tested , in the form of known Water plumbing pipe, NSF (National Sanitation Foundation) and DVGW (Deutscher Verein des Gas - und Wasserfaches) are certificated. North America and Germany, with the help of this it is possible to use certificates in drinking water installations.

The external opening of our pipes galvanized pipe tip sleeve tip on your teeth and tapali galvanized protective spray is applied. In this way, it is protected from corrosion.

Surface Coating Compliance

En 10025-2:2004 standard under S235JR, S275JR, S355JR , produced with the quality of notations, Class 1, or Class 3 as hot-dip galvanized coating by the method designed to accommodate other hot products quality are given in the tables the required information.

- House installations

- Industrial areas

- Large industrial projects

- Plumbing fields in the workplace

Manson, What Does It Do?

Manson has an important place for many different plumbing are among the topics which to be curious about the question of what does. The pipe is generally 2 to assemble the couplers are evaluated. At the same time plumbing threaded structure. Thus, the connection pipe combines the space about as a more effective way. The pipes are brought together firmly and in many different areas and are the most important parts that allows it to be used for long years. Both in the industrial area as well as a common format is used in all of the installations in the home or workplace.

Listed below are from our pipes through testing the production lines and en 10204 2.1; 2.2; 3.1; 3.2 Certified material test are delivered.

• Visual inspection and dimensional inspection

• Leak Test: Hydrostatic Test, Eddy Current Test

• Destructive Tests: Flat Up, Bending, Extending

• Mechanical Tests

• Chemical Analysis

• Metallographic Examination

• Material Test Certificates

En 10204 standard 2.1; 2.2; 3.1; 3.2 types are given, suitable for

• NDT Standards

ET (EN ISO 10893-2), MEAT (ASTM E309)

Completion Of Galvanized Pipe Threaded Sleeve

• Flat-blade or resource mouthed

• Gear and sleeve (Max OD: 168.3 mm)

• Grooved

• External protective coating (lacquered black or Red, other colours available upon request) or protective oil treatment

• Hot dip galvanizing

• TH, PP Coating

• Pipe Bare (Uncoated)

*General production standards.

Galvanized Pipe Steel Grades Raw Material Of Threaded Sleeve

St 37 DIN 17100-2, St 44, St 52

DIN 17100 Superseeded by DIN EN 10250-1

S195 en 10025, S235, S275, S355

ASTM G A, G B

En 10025 standard minimum yield strength ≤ 355 N/mm2 ( 36,2 kg/mm2) is applied to the material. Orders from other quality “is taken as an interview subject.

TS en 10255 standard and produced under all the pipes at 50 bar is tested.

Water conduitsquality as Miz UT (EN ISO 10893-11), ET (EN ISO 10893-2) NDT reasonable standards as are produced.

Quality documents

Threaded Sleeve Pipe Coating Standards

Galvanized Production size range : 1/2”-6” sizes in between can be applied.

The raw material used was 99.99% - purity zinc.

Sleeve gear and the pipes for the production standard (1/2’-6’) 7/1 ISO, ANSI B. 1.20.One

Victaulic slotting meets standard (3/4’-12’).

Norms Galvanizing Galvanized Pipe Threaded Sleeve

Water piping Pipes galvanized, hot dip galvanized coating are manufactured on the basis of. Hot-dip galvanizing to be made by the method in the process, the most critical point for the quality of the coating galvanized pipe Galvanized coating is whether it is suitable for raw materials. The ability to receive a coating of galvanized steel, they contain P (phosphorus), and especially Si (silica) is not understood by referring to the value.

Sleeve Threaded Galvanized Pipe Coating Standards

Galvanized Production size range : 1/2”-6” sizes in between can be applied.

The raw material used was 99.99% - purity zinc.